Already up to date. Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tbeam Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tbeam0.7 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/heltec-v2.0 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/heltec-v2.1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora_v1_3 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v2 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v2-1-1.6 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating adafruit/DHT sensor library 1.4.2 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora_isp4520 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/nrf52840dk Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/nrf52840dk-geeksville Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/feather_nrf52832 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak815 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak4631 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#80ed10d689a0568782c5bd152906b0f97d2bce93 3.5.0+sha.80ed10d [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak4600 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/ppr Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/ppr1 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/t-echo Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora-relay-v1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 4.1.0+sha.35d7962 [Up-to-date] Updating git+https://github.com/geeksville/OneButton.git 0.0.0+sha.ae171db [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library 1.1.0 [Up-to-date] Updating bodmer/TFT_eSPI 2.3.70 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora-relay-v2 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/native Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/linux Building for tlora-v2 with Processing tlora-v2 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.2.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 48 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tlora-v2/firmware.elf Retrieving maximum program size .pio/build/tlora-v2/firmware.elf Checking size .pio/build/tlora-v2/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73216 bytes from 327680 bytes) Flash: [========= ] 86.9% (used 1594079 bytes from 1835008 bytes) Building .pio/build/tlora-v2/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 26.22 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora-v2 SUCCESS 00:00:26.215 ========================= 1 succeeded in 00:00:26.215 ========================= Copying ESP32 bin file Building for tlora-v1 with Processing tlora-v1 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.2.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 48 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tlora-v1/firmware.elf Retrieving maximum program size .pio/build/tlora-v1/firmware.elf Checking size .pio/build/tlora-v1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73168 bytes from 327680 bytes) Flash: [========= ] 86.5% (used 1587043 bytes from 1835008 bytes) Building .pio/build/tlora-v1/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 26.45 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora-v1 SUCCESS 00:00:26.447 ========================= 1 succeeded in 00:00:26.447 ========================= Copying ESP32 bin file Building for tlora_v1_3 with Processing tlora_v1_3 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.2.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 44 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tlora_v1_3/firmware.elf Retrieving maximum program size .pio/build/tlora_v1_3/firmware.elf Checking size .pio/build/tlora_v1_3/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73216 bytes from 327680 bytes) Flash: [========= ] 86.9% (used 1594079 bytes from 1835008 bytes) Building .pio/build/tlora_v1_3/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.84 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora_v1_3 SUCCESS 00:00:25.843 ========================= 1 succeeded in 00:00:25.843 ========================= Copying ESP32 bin file Building for tlora-v2-1-1.6 with Processing tlora-v2-1-1.6 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.2.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 48 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tlora-v2-1-1.6/firmware.elf Retrieving maximum program size .pio/build/tlora-v2-1-1.6/firmware.elf Checking size .pio/build/tlora-v2-1-1.6/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73216 bytes from 327680 bytes) Flash: [========= ] 86.9% (used 1594079 bytes from 1835008 bytes) Building .pio/build/tlora-v2-1-1.6/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.99 seconds ========================= Environment Status Duration -------------- -------- ------------ tlora-v2-1-1.6 SUCCESS 00:00:25.993 ========================= 1 succeeded in 00:00:25.993 ========================= Copying ESP32 bin file Building for tbeam with Processing tbeam (board: ttgo-t-beam; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-t-beam.html PLATFORM: Espressif 32 (3.2.0) > TTGO T-Beam HARDWARE: ESP32 240MHz, 1.25MB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 48 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tbeam/firmware.elf Retrieving maximum program size .pio/build/tbeam/firmware.elf Checking size .pio/build/tbeam/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 5.6% (used 73216 bytes from 1310720 bytes) Flash: [========= ] 87.9% (used 1612707 bytes from 1835008 bytes) Building .pio/build/tbeam/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.85 seconds ========================= Environment Status Duration ------------- -------- ------------ tbeam SUCCESS 00:00:25.848 ========================= 1 succeeded in 00:00:25.848 ========================= Copying ESP32 bin file Building for heltec-v2.0 with Processing heltec-v2.0 (board: heltec_wifi_lora_32_V2; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32_V2.html PLATFORM: Espressif 32 (3.2.0) > Heltec WiFi LoRa 32 (V2) HARDWARE: ESP32 240MHz, 320KB RAM, 8MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 42 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/heltec-v2.0/firmware.elf Retrieving maximum program size .pio/build/heltec-v2.0/firmware.elf Checking size .pio/build/heltec-v2.0/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73216 bytes from 327680 bytes) Flash: [========= ] 86.9% (used 1594075 bytes from 1835008 bytes) Building .pio/build/heltec-v2.0/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.69 seconds ========================= Environment Status Duration ------------- -------- ------------ heltec-v2.0 SUCCESS 00:00:25.691 ========================= 1 succeeded in 00:00:25.691 ========================= Copying ESP32 bin file Building for heltec-v2.1 with Processing heltec-v2.1 (board: heltec_wifi_lora_32_V2; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32_V2.html PLATFORM: Espressif 32 (3.2.0) > Heltec WiFi LoRa 32 (V2) HARDWARE: ESP32 240MHz, 320KB RAM, 8MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 42 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/heltec-v2.1/firmware.elf Retrieving maximum program size .pio/build/heltec-v2.1/firmware.elf Checking size .pio/build/heltec-v2.1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 22.3% (used 73216 bytes from 327680 bytes) Flash: [========= ] 86.9% (used 1594075 bytes from 1835008 bytes) Building .pio/build/heltec-v2.1/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.07 seconds ========================= Environment Status Duration ------------- -------- ------------ heltec-v2.1 SUCCESS 00:00:25.067 ========================= 1 succeeded in 00:00:25.067 ========================= Copying ESP32 bin file Building for tbeam0.7 with Processing tbeam0.7 (board: ttgo-t-beam; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-t-beam.html PLATFORM: Espressif 32 (3.2.0) > TTGO T-Beam HARDWARE: ESP32 240MHz, 1.25MB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30000.201119 (3.0.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 48 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0.1 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 3.5.0+sha.80ed10d | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.0.0+sha.daf6ca1 |-- 1.4.2 | |-- 1.1.4 |-- 1.1.4 |-- 1.0 | |-- 1.0 |-- 1.0 |-- 1.0.1 |-- 1.0 |-- 1.0 |-- |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Linking .pio/build/tbeam0.7/firmware.elf Retrieving maximum program size .pio/build/tbeam0.7/firmware.elf Checking size .pio/build/tbeam0.7/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 5.6% (used 73216 bytes from 1310720 bytes) Flash: [========= ] 87.4% (used 1603219 bytes from 1835008 bytes) Building .pio/build/tbeam0.7/firmware.bin esptool.py v3.0 ========================= [SUCCESS] Took 25.54 seconds ========================= Environment Status Duration ------------- -------- ------------ tbeam0.7 SUCCESS 00:00:25.535 ========================= 1 succeeded in 00:00:25.535 ========================= Copying ESP32 bin file Building for rak4631 with Processing rak4631 (board: wiscore_rak4631; platform: https://github.com/meshtastic/platform-nordicnrf52.git#merge; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/nordicnrf52/wiscore_rak4631.html PLATFORM: Nordic nRF52 (7.1.0+sha.1cab6c7) > WisCore RAK4631 Board HARDWARE: NRF52840 64MHz, 243KB RAM, 796KB Flash DEBUG: Current (jlink) External (jlink, stlink) PACKAGES: - framework-arduinoadafruitnrf52 0.21.0+sha.8643aa4 - tool-sreccat 1.164.0 (1.64) - toolchain-gccarmnoneeabi 1.70201.0 (7.2.1) LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 25 compatible libraries Scanning dependencies... Dependency Graph |-- 4.1.0+sha.35d7962 | |-- 1.0 | |-- 1.0 |-- 0.0.0+sha.ae171db |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0 |-- 3.5.0+sha.80ed10d | |-- 1.0 | |-- 1.0.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0 |-- 1.0 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 0.0.3 |-- 0.11.0 | |-- 0.11.0 |-- |-- 0.11.0 |-- 0.21.0 | |-- 0.11.0 | |-- 0.11.0 | | |-- 0.11.0 Building in debug mode Using meshtastic platform-custom.py, firmare version 1.2.43.9f450cb Compiling .pio/build/rak4631/src/nrf52/main-nrf52.cpp.o Compiling .pio/build/rak4631/src/plugins/RemoteHardwarePlugin.cpp.o Compiling .pio/build/rak4631/src/plugins/ReplyPlugin.cpp.o Compiling .pio/build/rak4631/src/plugins/RoutingPlugin.cpp.o Compiling .pio/build/rak4631/src/plugins/SerialPlugin.cpp.o Compiling .pio/build/rak4631/src/plugins/TextMessagePlugin.cpp.o src/nrf52/main-nrf52.cpp: In function 'bool loopCanSleep()': src/nrf52/main-nrf52.cpp:25:14: error: 'TinyUSBDevice' was not declared in this scope return !(TinyUSBDevice.mounted() && !TinyUSBDevice.suspended()); ^~~~~~~~~~~~~ src/nrf52/main-nrf52.cpp:25:14: note: suggested alternative: 'USBDevice' return !(TinyUSBDevice.mounted() && !TinyUSBDevice.suspended()); ^~~~~~~~~~~~~ USBDevice *** [.pio/build/rak4631/src/nrf52/main-nrf52.cpp.o] Error 1 ========================== [FAILED] Took 4.95 seconds ========================== Environment Status Duration ------------- -------- ------------ rak4631 FAILED 00:00:04.950 ==================== 1 failed, 0 succeeded in 00:00:04.950 ====================