From https://github.com/meshtastic/Meshtastic-device 2f2e1e3..0aad5b6 artifacts -> origin/artifacts Already up to date. Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/nrf52840dk Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/feather_nrf52832 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak815 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak11200 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora_v1_3 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v2 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/heltec-v2.0 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v2-1-1.6 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/meshtastic-diy-v1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/meshtastic-diy-v1.1 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/ppr1 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/heltec-v1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora-relay-v1 Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating sparkfun/SparkFun BQ27441 LiPo Fuel Gauge Arduino Library 1.1.0 [Up-to-date] Updating bodmer/TFT_eSPI 2.4.39 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/native Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/linux Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora-relay-v2 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/t-echo Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak4631_5005 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/rak4631_19003 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tbeam Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/nrf52840dk-geeksville Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/ppr Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/lora_isp4520 Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tbeam0.7 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/heltec-v2.1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] Library Storage: /home/jm/meshtastic/github/meshtastic/Meshtastic-device/.pio/libdeps/tlora-v1 Updating git+https://github.com/meshtastic/esp8266-oled-ssd1306.git#d90231dedbb2f52bd7a32fb8ed8edec52cf4a8cb 4.2.1+sha.d90231d [Up-to-date] Updating git+https://github.com/meshtastic/OneButton.git#3bcba9492d01e2a8a86f46700ab16f96dd2cf1f5 2.0.3+sha.3bcba94 [Up-to-date] Updating bakercp/CRC32 2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/arduino-fsm.git 2.2.0+sha.7db3702 [Up-to-date] Updating git+https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad 1.7.2+sha.31015a5 [Up-to-date] Updating git+https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74 4.5.0+sha.5582ac3 [Up-to-date] Updating git+https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79 1.0.2+sha.f0f4706 [Up-to-date] Updating git+https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460 1.1.1+sha.8404abb [Up-to-date] Updating git+https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3 0.0.0+sha.72921ac [Up-to-date] Updating knolleary/PubSubClient 2.8.0 [Up-to-date] Updating adafruit/DHT sensor library 1.4.3 @ ^1.4.1 [Up-to-date] Updating adafruit/Adafruit Unified Sensor 1.1.4 @ ^1.1.4 [Up-to-date] Updating paulstoffregen/OneWire 2.3.6 @ ^2.3.5 [Up-to-date] Updating robtillaart/DS18B20 0.1.12 @ ^0.1.11 [Up-to-date] Updating adafruit/Adafruit BME280 Library 2.2.2 @ ^2.2.2 [Up-to-date] Updating adafruit/Adafruit BME680 Library 2.0.1 @ ^2.0.1 [Up-to-date] Updating adafruit/Adafruit MCP9808 Library 2.0.0 @ ^2.0.0 [Up-to-date] Updating git+https://github.com/meshtastic/esp32_https_server.git 1.0.0+sha.daf6ca1 [Up-to-date] Updating h2zero/NimBLE-Arduino 1.3.6 @ 1.3.6 [Incompatible 1.3.7] Updating tobozo/ESP32-targz 1.1.4 @ ^1.1.4 [Up-to-date] Updating lorol/LittleFS_esp32 1.0.6 @ ^1.0.6 [Up-to-date] about to build rak11200 false Building for rak11200 (false) with Processing rak11200 (board: wiscore_rak11200; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/wiscore_rak11200.html PLATFORM: Espressif 32 (3.5.0) > WisCore RAK11200 Board HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, ftdi, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 53 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.11.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.11.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.11.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/rak11200/firmware.elf Retrieving maximum program size .pio/build/rak11200/firmware.elf Checking size .pio/build/rak11200/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79920 bytes from 327680 bytes) Flash: [========= ] 92.0% (used 1687431 bytes from 1835008 bytes) Building .pio/build/rak11200/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 40.42 seconds ========================= Environment Status Duration ------------- -------- ------------ rak11200 SUCCESS 00:00:40.420 ========================= 1 succeeded in 00:00:40.420 ========================= Copying ESP32 bin file about to build tlora-v2 false Building for tlora-v2 (false) with Processing tlora-v2 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.5.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 65 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tlora-v2/firmware.elf Retrieving maximum program size .pio/build/tlora-v2/firmware.elf Checking size .pio/build/tlora-v2/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.6% (used 1699575 bytes from 1835008 bytes) Building .pio/build/tlora-v2/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.89 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora-v2 SUCCESS 00:00:38.893 ========================= 1 succeeded in 00:00:38.893 ========================= Copying ESP32 bin file about to build tlora-v1 false Building for tlora-v1 (false) with Processing tlora-v1 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.5.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 65 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tlora-v1/firmware.elf Retrieving maximum program size .pio/build/tlora-v1/firmware.elf Checking size .pio/build/tlora-v1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79936 bytes from 327680 bytes) Flash: [========= ] 92.3% (used 1693259 bytes from 1835008 bytes) Building .pio/build/tlora-v1/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.88 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora-v1 SUCCESS 00:00:38.876 ========================= 1 succeeded in 00:00:38.876 ========================= Copying ESP32 bin file about to build tlora_v1_3 false Building for tlora_v1_3 (false) with Processing tlora_v1_3 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.5.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 61 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tlora_v1_3/firmware.elf Retrieving maximum program size .pio/build/tlora_v1_3/firmware.elf Checking size .pio/build/tlora_v1_3/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.6% (used 1699603 bytes from 1835008 bytes) Building .pio/build/tlora_v1_3/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.88 seconds ========================= Environment Status Duration ------------- -------- ------------ tlora_v1_3 SUCCESS 00:00:38.882 ========================= 1 succeeded in 00:00:38.882 ========================= Copying ESP32 bin file about to build tlora-v2-1-1.6 false Building for tlora-v2-1-1.6 (false) with Processing tlora-v2-1-1.6 (board: ttgo-lora32-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html PLATFORM: Espressif 32 (3.5.0) > TTGO LoRa32-OLED V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 65 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tlora-v2-1-1.6/firmware.elf Retrieving maximum program size .pio/build/tlora-v2-1-1.6/firmware.elf Checking size .pio/build/tlora-v2-1-1.6/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.6% (used 1699671 bytes from 1835008 bytes) Building .pio/build/tlora-v2-1-1.6/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.84 seconds ========================= Environment Status Duration -------------- -------- ------------ tlora-v2-1-1.6 SUCCESS 00:00:38.844 ========================= 1 succeeded in 00:00:38.844 ========================= Copying ESP32 bin file about to build tbeam false Building for tbeam (false) with Processing tbeam (board: ttgo-t-beam; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-t-beam.html PLATFORM: Espressif 32 (3.5.0) > TTGO T-Beam HARDWARE: ESP32 240MHz, 1.25MB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 65 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tbeam/firmware.elf Retrieving maximum program size .pio/build/tbeam/firmware.elf Checking size .pio/build/tbeam/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 6.1% (used 79976 bytes from 1310720 bytes) Flash: [========= ] 94.2% (used 1728683 bytes from 1835008 bytes) Building .pio/build/tbeam/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.88 seconds ========================= Environment Status Duration ------------- -------- ------------ tbeam SUCCESS 00:00:38.880 ========================= 1 succeeded in 00:00:38.880 ========================= Copying ESP32 bin file about to build heltec-v1 false Building for heltec-v1 (false) with Processing heltec-v1 (board: heltec_wifi_lora_32; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32.html PLATFORM: Espressif 32 (3.5.0) > Heltec WiFi LoRa 32 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 56 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/heltec-v1/firmware.elf Retrieving maximum program size .pio/build/heltec-v1/firmware.elf Checking size .pio/build/heltec-v1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.6% (used 1699527 bytes from 1835008 bytes) Building .pio/build/heltec-v1/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 39.32 seconds ========================= Environment Status Duration ------------- -------- ------------ heltec-v1 SUCCESS 00:00:39.316 ========================= 1 succeeded in 00:00:39.316 ========================= Copying ESP32 bin file about to build heltec-v2.0 false Building for heltec-v2.0 (false) with Processing heltec-v2.0 (board: heltec_wifi_lora_32_V2; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32_V2.html PLATFORM: Espressif 32 (3.5.0) > Heltec WiFi LoRa 32 (V2) HARDWARE: ESP32 240MHz, 320KB RAM, 8MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 59 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/heltec-v2.0/firmware.elf Retrieving maximum program size .pio/build/heltec-v2.0/firmware.elf Checking size .pio/build/heltec-v2.0/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.6% (used 1699619 bytes from 1835008 bytes) Building .pio/build/heltec-v2.0/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 39.53 seconds ========================= Environment Status Duration ------------- -------- ------------ heltec-v2.0 SUCCESS 00:00:39.529 ========================= 1 succeeded in 00:00:39.529 ========================= Copying ESP32 bin file about to build heltec-v2.1 false Building for heltec-v2.1 (false) with Processing heltec-v2.1 (board: heltec_wifi_lora_32_V2; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32_V2.html PLATFORM: Espressif 32 (3.5.0) > Heltec WiFi LoRa 32 (V2) HARDWARE: ESP32 240MHz, 320KB RAM, 8MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 59 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/heltec-v2.1/firmware.elf Retrieving maximum program size .pio/build/heltec-v2.1/firmware.elf Checking size .pio/build/heltec-v2.1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79984 bytes from 327680 bytes) Flash: [========= ] 92.7% (used 1700247 bytes from 1835008 bytes) Building .pio/build/heltec-v2.1/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 39.76 seconds ========================= Environment Status Duration ------------- -------- ------------ heltec-v2.1 SUCCESS 00:00:39.758 ========================= 1 succeeded in 00:00:39.758 ========================= Copying ESP32 bin file about to build tbeam0.7 false Building for tbeam0.7 (false) with Processing tbeam0.7 (board: ttgo-t-beam; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-t-beam.html PLATFORM: Espressif 32 (3.5.0) > TTGO T-Beam HARDWARE: ESP32 240MHz, 1.25MB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 65 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/tbeam0.7/firmware.elf Retrieving maximum program size .pio/build/tbeam0.7/firmware.elf Checking size .pio/build/tbeam0.7/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 6.1% (used 79984 bytes from 1310720 bytes) Flash: [========= ] 93.7% (used 1718879 bytes from 1835008 bytes) Building .pio/build/tbeam0.7/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.99 seconds ========================= Environment Status Duration ------------- -------- ------------ tbeam0.7 SUCCESS 00:00:38.985 ========================= 1 succeeded in 00:00:38.985 ========================= Copying ESP32 bin file about to build meshtastic-diy-v1 false Building for meshtastic-diy-v1 (false) with Processing meshtastic-diy-v1 (board: esp32doit-devkit-v1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32doit-devkit-v1.html PLATFORM: Espressif 32 (3.5.0) > DOIT ESP32 DEVKIT V1 HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (jlink) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 0.0.0+sha.4cde0f5d - tool-esptoolpy 1.30100.210531 (3.1.0) - toolchain-xtensa32 2.50200.97 (5.2.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Library Manager: Installing arduino-libraries/NTPClient#531eff39d9fbc831f3d03f706a161739203fbe2a Unpacking Library Manager: NTPClient @ 3.1.0 has been installed! Found 56 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0.1 | |-- 1.0 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0.1 |-- 4.5.0+sha.5582ac3 | |-- 1.0 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0.1 |-- 1.0.1 |-- 1.0 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0.1 | | |-- 1.0 | |-- 1.0.1 | |-- 1.0 | |-- 1.1.4 |-- 1.0.0+sha.daf6ca1 |-- 1.3.6 |-- 1.1.4 | |-- 1.0 | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0.6 | | |-- 1.0 | |-- 1.0.5 | | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0.6 | |-- 1.0 |-- 1.0 |-- 1.0 |-- |-- 1.2 | |-- 1.0 | | |-- 1.0 | |-- 1.0 | | |-- 1.0 | | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 | |-- 1.0 |-- 1.0 | |-- 1.0 |-- 1.1.0 | |-- 1.0 | | |-- 1.0 |-- 1.0 | |-- 1.0 | | |-- 1.0 |-- 3.1.0 Building in release mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Linking .pio/build/meshtastic-diy-v1/firmware.elf Retrieving maximum program size .pio/build/meshtastic-diy-v1/firmware.elf Checking size .pio/build/meshtastic-diy-v1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [== ] 24.4% (used 79936 bytes from 327680 bytes) Flash: [========= ] 93.0% (used 1707275 bytes from 1835008 bytes) Building .pio/build/meshtastic-diy-v1/firmware.bin esptool.py v3.1 Merged 1 ELF section ========================= [SUCCESS] Took 38.17 seconds ========================= Environment Status Duration ----------------- -------- ------------ meshtastic-diy-v1 SUCCESS 00:00:38.169 ========================= 1 succeeded in 00:00:38.169 ========================= Copying ESP32 bin file about to build rak4631_5005 true Building for rak4631_5005 (true) with Processing rak4631_5005 (board: wiscore_rak4631; platform: https://github.com/meshtastic/platform-nordicnrf52.git#merge; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/nordicnrf52/wiscore_rak4631.html PLATFORM: Nordic nRF52 (8.2.0+sha.4ec5d1a) > WisCore RAK4631 Board HARDWARE: NRF52840 64MHz, 243KB RAM, 796KB Flash DEBUG: Current (jlink) External (jlink, stlink) PACKAGES: - framework-arduinoadafruitnrf52 0.21.0+sha.06b5888 - framework-cmsis 2.50700.210515 (5.7.0) - tool-adafruit-nrfutil 1.503.0 (5.3) - tool-sreccat 1.164.0 (1.64) - toolchain-gccarmnoneeabi 1.70201.0 (7.2.1) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 36 compatible libraries Scanning dependencies... Dependency Graph |-- 4.2.1+sha.d90231d | |-- 1.0 | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 |-- 2.0.3+sha.3bcba94 |-- 2.0.0 |-- 2.2.0+sha.7db3702 |-- 1.7.2+sha.31015a5 | |-- 1.0 | | |-- 1.4.3 |-- 4.5.0+sha.5582ac3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.0.0 | | |-- 1.4.3 |-- 1.0.2+sha.f0f4706 |-- 1.1.1+sha.8404abb | |-- 1.0 | | |-- 1.4.3 |-- 1.0 | |-- 1.4.3 |-- 1.0 | |-- 1.4.3 |-- 0.0.0+sha.72921ac |-- 2.8.0 |-- 1.4.3 | |-- 1.1.4 |-- 1.1.4 |-- 2.3.6 |-- 0.1.12 | |-- 2.3.6 |-- 2.2.2 | |-- 1.10.1 | | |-- 1.0 | | | |-- 1.4.3 | | |-- 1.0 | | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.1.4 |-- 2.0.1 | |-- 1.10.1 | | |-- 1.0 | | | |-- 1.4.3 | | |-- 1.0 | | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.1.4 |-- 2.0.0 | |-- 1.10.1 | | |-- 1.0 | | | |-- 1.4.3 | | |-- 1.0 | | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.0 | | |-- 1.4.3 | |-- 1.1.4 |-- 0.0.5 | |-- 1.4.3 |-- 0.11.0 | |-- 0.11.0 | | |-- 1.4.3 |-- 0.21.0 | |-- 1.4.3 | |-- 0.11.0 | | |-- 1.4.3 | |-- 0.11.0 | | |-- 0.11.0 | | | |-- 1.4.3 |-- Building in debug mode Using meshtastic platform-custom.py, firmare version 1.3.0.54f062e Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp.o Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_Device.cpp.o Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/bth/bth_device.c.o Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/cdc/cdc_device.c.o Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/dfu/dfu_rt_device.c.o Compiling .pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/hid/hid_device.c.o In file included from /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_Device.cpp:27:0: /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_Device.h:28:10: fatal error: tusb.h: No such file or directory ************************************************************** * Looking for tusb.h dependency? Check our library registry! * * CLI > platformio lib search "header:tusb.h" * Web > https://registry.platformio.org/search?q=header:tusb.h * ************************************************************** #include "tusb.h" ^~~~~~~~ compilation terminated. *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_Device.cpp.o] Error 1 /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/dfu/dfu_rt_device.c:27:10: fatal error: tusb_option.h: No such file or directory ********************************************************************* * Looking for tusb_option.h dependency? Check our library registry! * * CLI > platformio lib search "header:tusb_option.h" * Web > https://registry.platformio.org/search?q=header:tusb_option.h * ********************************************************************* #include "tusb_option.h" ^~~~~~~~~~~~~~~ compilation terminated. /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/bth/bth_device.c:27:10: fatal error: tusb_option.h: No such file or directory ********************************************************************* * Looking for tusb_option.h dependency? Check our library registry! * * CLI > platformio lib search "header:tusb_option.h" * Web > https://registry.platformio.org/search?q=header:tusb_option.h * ********************************************************************* #include "tusb_option.h" ^~~~~~~~~~~~~~~ compilation terminated. /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/hid/hid_device.c:27:10: fatal error: tusb_option.h: No such file or directory ********************************************************************* * Looking for tusb_option.h dependency? Check our library registry! * * CLI > platformio lib search "header:tusb_option.h" * Web > https://registry.platformio.org/search?q=header:tusb_option.h * ********************************************************************* #include "tusb_option.h" ^~~~~~~~~~~~~~~ compilation terminated. /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/cdc/cdc_device.c:27:10: fatal error: tusb_option.h: No such file or directory ********************************************************************* * Looking for tusb_option.h dependency? Check our library registry! * * CLI > platformio lib search "header:tusb_option.h" * Web > https://registry.platformio.org/search?q=header:tusb_option.h * ********************************************************************* #include "tusb_option.h" ^~~~~~~~~~~~~~~ compilation terminated. *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/cdc/cdc_device.c.o] Error 1 *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/hid/hid_device.c.o] Error 1 *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/bth/bth_device.c.o] Error 1 *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src/class/dfu/dfu_rt_device.c.o] Error 1 /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:40:89: error: no 'uint16_t Adafruit_USBD_CDC::getDescriptor(uint8_t, uint8_t*, uint16_t)' member function declared in class 'Adafruit_USBD_CDC' uint16_t Adafruit_USBD_CDC::getDescriptor(uint8_t itfnum, uint8_t* buf, uint16_t bufsize) ^ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'uint32_t Adafruit_USBD_CDC::baud()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:72:3: error: 'cdc_line_coding_t' was not declared in this scope cdc_line_coding_t coding; ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:73:28: error: 'coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:73:28: note: suggested alternative: 'String' tud_cdc_get_line_coding(&coding); ^~~~~~ String /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:73:3: error: 'tud_cdc_get_line_coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'uint8_t Adafruit_USBD_CDC::stopbits()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:80:3: error: 'cdc_line_coding_t' was not declared in this scope cdc_line_coding_t coding; ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:81:28: error: 'coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:81:28: note: suggested alternative: 'String' tud_cdc_get_line_coding(&coding); ^~~~~~ String /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:81:3: error: 'tud_cdc_get_line_coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'uint8_t Adafruit_USBD_CDC::paritytype()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:88:3: error: 'cdc_line_coding_t' was not declared in this scope cdc_line_coding_t coding; ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:89:28: error: 'coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:89:28: note: suggested alternative: 'String' tud_cdc_get_line_coding(&coding); ^~~~~~ String /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:89:3: error: 'tud_cdc_get_line_coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'uint8_t Adafruit_USBD_CDC::numbits()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:96:3: error: 'cdc_line_coding_t' was not declared in this scope cdc_line_coding_t coding; ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:97:28: error: 'coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:97:28: note: suggested alternative: 'String' tud_cdc_get_line_coding(&coding); ^~~~~~ String /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:97:3: error: 'tud_cdc_get_line_coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'int Adafruit_USBD_CDC::dtr()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:104:10: error: 'tud_cdc_connected' was not declared in this scope return tud_cdc_connected(); ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'Adafruit_USBD_CDC::operator bool()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:109:14: error: 'tud_cdc_connected' was not declared in this scope bool ret = tud_cdc_connected(); ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual int Adafruit_USBD_CDC::available()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:120:20: error: 'tud_cdc_available' was not declared in this scope uint32_t count = tud_cdc_available(); ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:120:20: note: suggested alternative: 'available' uint32_t count = tud_cdc_available(); ^~~~~~~~~~~~~~~~~ available /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual int Adafruit_USBD_CDC::peek()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:132:10: error: 'tud_cdc_peek' was not declared in this scope return tud_cdc_peek(0, &ch) ? (int) ch : -1; ^~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual int Adafruit_USBD_CDC::read()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:137:16: error: 'tud_cdc_read_char' was not declared in this scope return (int) tud_cdc_read_char(); ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual void Adafruit_USBD_CDC::flush()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:142:3: error: 'tud_cdc_write_flush' was not declared in this scope tud_cdc_write_flush(); ^~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual size_t Adafruit_USBD_CDC::write(const uint8_t*, size_t)': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:153:21: error: 'tud_cdc_connected' was not declared in this scope while ( remain && tud_cdc_connected() ) ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:155:22: error: 'tud_cdc_write' was not declared in this scope size_t wrcount = tud_cdc_write(buffer, remain); ^~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:155:22: note: suggested alternative: 'sd_flash_write' size_t wrcount = tud_cdc_write(buffer, remain); ^~~~~~~~~~~~~ sd_flash_write /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In member function 'virtual int Adafruit_USBD_CDC::availableForWrite()': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:168:10: error: 'tud_cdc_write_available' was not declared in this scope return tud_cdc_write_available(); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp: In function 'void tud_cdc_line_state_cb(uint8_t, bool, bool)': /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:184:5: error: 'cdc_line_coding_t' was not declared in this scope cdc_line_coding_t coding; ^~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:185:30: error: 'coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:185:30: note: suggested alternative: 'String' tud_cdc_get_line_coding(&coding); ^~~~~~ String /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:185:5: error: 'tud_cdc_get_line_coding' was not declared in this scope tud_cdc_get_line_coding(&coding); ^~~~~~~~~~~~~~~~~~~~~~~ /home/jm/.platformio/packages/framework-arduinoadafruitnrf52/cores/nRF5/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp:187:36: error: 'Adafruit_TinyUSB_Core_touch1200' was not declared in this scope if ( coding.bit_rate == 1200 ) Adafruit_TinyUSB_Core_touch1200(); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** [.pio/build/rak4631_5005/FrameworkArduino/TinyUSB/Adafruit_TinyUSB_ArduinoCore/Adafruit_USBD_CDC.cpp.o] Error 1 ========================= [FAILED] Took 10.45 seconds ========================= Environment Status Duration ------------- -------- ------------ rak4631_5005 FAILED 00:00:10.445 ==================== 1 failed, 0 succeeded in 00:00:10.445 ====================